RAMCO POWDER SYSTEM WITH STAINLESS STEEL WASHER AND AUTOMATIC POWDER APPLICATION
ITEM
NUMBER RAMPS2452
CLICK FOR PICTURES
"VERY GOOD TO EXCELLENT CONDITION"
STAINLESS STEEL WASHER
FOUR(4) COMPLETE COLOR MODULES
6 AUTOMATIC GUNS
2 AUTO RECIPS
24" X 52 " OPENINGS
12 FPM DESIGN LINE SPEED
SYSTEM FOOTPRINT
115' X 40'
CAN BE RECONFIGURED TO SUIT LOCATION
ONLY 2400 HOURS PRODUCTION TIME ON SYSTEM
SPECIFICATIONS:
Washer:
- 3 stage S.S.
- opening 24”w x 52”h
- 24” hangers
- 12 FPM design speed
- 2.0 mil BTUH burner
- waste water treatment (PH balancing)
- control panel, 480/3/60 @48.6 amps
Entrance vestibule 5 ’
1st stage is gas heated 20 ’ long
Drain 8 ’
2nd stage 10 ’
Drain 8 ’
3rd stage 5 ’
Drain & Exit Vestibule 8 ’
TOTAL LENGTH 64’
Entrance and Exit Vestibules with containment exhausters.
Oven:
- trapezoid configuration
- opening 24”w x 52”h
- 3’0” dia. turns in oven
- max part 72”lg. Hung at an angle
- comb. Dry / cure with no divider wall
- approx 6’0” airseals on all openings
- control panel, 480/3/60 @46.6 amps
Conveyor:
- approx 700’0” Rapid ind.
- Vert. Cat drive
- Air powered auto takeup
- 24” pendent centers
- digilube auto oiler
- 18” & 24” rad turns
- All Existing Racks & Hangers
Powder Booth:
- IPE S.S. side draft collectors
- Opening 24” x 52”
- 4 reclaim / color modules
- Onoda powder spray equipment
- 6 automatic guns
- 2 powder recips w/ programmable controls
- 1 manual touch up (gema)
- product sensing for on/off control
- flame detection system
CONDITION: VERY GOOD TO EXCELLENT
F.O.B.:
FLORIDA - LOADED ONTO TRUCK
TERMS:
NET DUE PRIOR TO SHIPMENT
SOLD
ON FIRST PURCHASE ORDER BASIS.
GENERAL:
- Technician(s)
familiar with the system are available to assist with installation,
start-up, training and initial production. (At additional negotiated
cost)
- System installation
can be provided at additional cost.
- System F.O.B.
from its location.
- Detailed quotation
and specifications provided upon request
- Site visit to
view system can be arranged upon request.
PRICING:
RETURN
TO USED EQUIPMENT LISTINGS
Steven
G. Maurer
Industrial Finishing Tech., Inc.
800-755-9872
|
