USED POLLUTION CONTROL PRODUCTS

BURN OFF OVEN, MODEL PRC-150 :

ITEM NUMBER BOOPRC150

CLICK FOR PICTURES OF SIMILAR RECONDITIONED OVEN

SPECIFICATIONS:

CURRENTLY BEING REONDITIONED

QUALITY PCP MANUFACTURED

AUTOMATIC RATE CONTROL SYSTEM

EXISTING PROCESS CART AND STACKING INCLUDED

NATURAL GAS OR PROPANE FIRED

REMOVAL AND LOADING INCLUDED

1 - Model PRC-150 PYROLYTIC BURN OFF OVEN

Furnace Includes: 

Existing insulated stainless steel exhaust stacking, new roof flashing and rain cap, instruction manual, and existing flat bed cart.

Features  on PRC Model Furnaces

• Commercial Gas Burners:

Furnace is equipped with Incinomite "Incinerator Gas Burners” designed specifically for incinerator and other similar applications.  Features include quiet motor-driven high-output blower, superior no clog nozzle design, easy maintenance, and rugged heavy-duty construction.  Each burner is equipped with a patented automatic self-cooling system that inhibits burner damage from heat

backup.  All flame-safeguard components and associated wiring are located outside of the blast tube and blower housing, away from destructive heat. The blast tube contains only electrodes that provide ignition and flame detection. There is nothing to clog and no wires to burn.

• 5-Layer Wall Protection:

Corrosion-resistant barrier 1/8”thick is applied to furnace walls prior to installing insulation, adding years to the useful life of the furnace.  Insulation is protected by perforated metal.  Walls constructed of 16 GA steel supported by structural angles with 10 GA steel on front doors and relief doors.

• Diagnostic Panel:

Monitors the furnace components during start-up and advises the operator of any abnormalities.

• Digital Controllers:

Microprocessor-based digital controllers monitor the furnace and afterburner temperature and control operation of the water spray system and lower burner.

• Back-up Water Spray:

In the event that the primary rate control fails to control any overheat, a separate water spray system will activate as a backup safety control.

• Floor:

Floor insulated with castable refractory insulation.

• Pyrolysis/Oxidation Control System: 

Provides an oxygen-limited, inert atmosphere inside the furnace while the paint or other organic material vaporizes off the parts into combustible smoke and Pyrolysis gases.  This virtually eliminates the possibility of the parts catching on fire inside of the furnace.  Once most of the organic material has vaporized off the parts, the control system automatically allows the oxygen level in the furnace to increase in order to completely oxidize any remaining carbon or char off the parts.

• Advanced RateControlled System:

This system monitors the RATE of temperature increase in both the furnace and the afterburner.  Water mist sprays immediately to control any overheat detected.  This is automatic and there are no menus for the operator to select.  The allowable RATE, programmed at the factory, does not require changes regardless of the size of the load or the type of paint/powder to remove.

• Automatic Timing Cycle:

The operator no longer has to guess how long to set on the cycle timer.  The furnace runs only as long as it takes to clean the load and no longer.

CUSTOMER RESPONSIBILITY

• Comply with installation, operation and maintenance instruction
•  Receive, and position furnace;
• Connect all utilities
• Any additional stacking required and Cutting, patching, roofing.

Terms:              NET DUE PRIOR TO SHIPMENT

F.O.B.:              SP, OUR PAINESVILLE, OHIO PLANT

Delivery:          UPON RECONDITIONING COMPLETION

SOLD ON AN AS IS, FIRST PURCHASE ORDER BASIS.

CALL OR EMAIL FOR PRICING

RETURN TO USED EQUIPMENT LISTINGS

 
Steven G. Maurer
Industrial Finishing Tech., Inc.
800-755-9872

389 WEST PROSPECT

PAINESVILLE INDUSTRIAL PARK

PAINESVILLE, OHIO 44077
440.256.0200 • 800.755.9872
Fax: 440.256.0400 • E-mail